_____________________________________________________________________
SYSTEM REQUIREMENTS 
_____________________________________________________________________  

            - 80386 MS-DOS PC            

            - 1MB RAM or higher 
            
            - 1MB SVGA graphics card for 640x480 mode

            - Mouse (with a DOS mouse driver loaded!)

If you are not able to load 640x480 in Mode [3], try using 640x480 
in Mode [4].  If you are not able to use either setting, check your
video card documentation to make sure that your card can support 
SVGA graphics at a resolution of 640x480 pixels and 256 colors.
You can also try using a third-party VESA driver like Display Doctor
from Scitech Software.  This program can be downloaded from 
www.scitechsoft.com.


---------------------------------------------------------------------
MENU FUNCTIONS
---------------------------------------------------------------------

BRUSH...........activate the Brush menu (begin to paint) 

COLOR...........select a color from the palette
                *this may also be activated from any brush 
                 menu by clicking on the color wheel

DRIP............toggle the drip effect for spray 1 and 2

EXIT............quit to DOS (without saving)

FILE............activate the File/Utility menu

PCXLOAD.........load a PCX file from the program's directory

PCXSAVE.........save the current image to disk as a PCX file.

Please note: the ".pcx" extension will not be shown in the file
load/save screens.  Any image files in the program directory with a 
".pcx" extension will be displayed.  The filename box only accepts
eight characters.  The ".pcx" will automatically be attached to the
filename when it is saved.

WASH............change the digitized pixel color to the selected
                color.  think of this as a screen fill for all
                pixels of the same color.

The following brushes work best when used on existing images:
        DYE, DIM, FLARE, LCD, ALIEN2, WIPER, SCALPEL, GOOP


